3315F

DC Electronic Load

60V,15A,75W

 ●  3302F mainframe provides the NTC simulation test
     function(Option)

 ●  New waveform generator plug in model 9923 adds 
     user programmable battery discharge current 
     waveform simulation to Prodigit DC Loads

Feature


Description

  • Each 3310F Series module has its own control and display panel, CC/CR/CV/CP/Dynamic modes, plug in 3300F with 150 sets Store/Recall memory which provides load set-up more efficiently,also can be controlled intranet via RS232、Ethernet、USB and GPIB interface.
  • SHORT time setting and SHORT_VH, SHORT_VL setting function,also can measure Short Voltage and Current.
  • Dynamic can be simulated under CC, CP mode. The current Rise/Fall slew rate can be adjusted individually and there is an external signal input so that load can have a simulated Arbitrary Waveform.
  • The additional OCP 、OPP test function operated by both mainframe and module that will be more efficiency and accuracy on OCP, OPP testing.
  • Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display “ + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
  • 150 sets test parameter and status storage function can call the storage memory real time in accordance with the auto sequence requirement.
  • Short, OCCP and OCDP function test for BMS protection board is provided (option)


Applications
  • Voltage / Current source
  • SMPS transient response
  • Current limit testing and battery emulation
  • Battery charger
  • Battery discharge
  • R&D, Quality Control
  • ATE system
  • Production testing














All specifications are subject to change without notice.