34305E

Compact High Power DC Electronic Load

1250V, 25A, 5KW

                 Maximum power up to 40KW

     Maximum current up to 200A

 ●  New waveform generator plug in model 9923 adds 
     user programmable battery dischargecurrent 
     waveform simulation to Prodigit DC Loads

Feature

  • With parallel function maximum power up to 320KW.
  • Maximum up to 8 units master / slave parallel control.
  • 5 digit V/A/W Meter.
  • High-speed measurement and communication transmission.
  • Large LCD Display、setting values can be adjusted by rotary knob or push button.   
  • Voltage、Current and Watt value can be displayed simultaneously.
  • Capable for Power Factor Correction (PFC) Test. 
  • OCP、OPP test function automatically.
  • Power ON status can be set.
  • CC, CR, CV, CP , CC+CV , CP+CV , Dynamic and Short operation mode.
  • SHORT time setting. 
  • Protections against I,W,°C and over-voltage alert.
  • Voltage meter display the polarity positive(”+”)or negative(”-”)is selectable.
  • Short, OCCP and OCDP function test for BMS protection board is provided (option)
  • Option:Emergency Stop and Analog Control are available.
  • Optional Interface : GPIB、RS232、USB、LAN.
  • 0.7V @ 1000A is on Static condition, and the starting voltage must be greater than 5V, if on Dynamic condition that is 5V @ 1000A

Description

  • 34300E Series has its own control and display panel, CC / CR / CV / CP / Dynamic modes, 150 sets Store / Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB、RS232、USB and LAN interface.
  • SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
  • Dynamic can be simulated under CC, CP mode. The current Rise / Fall slew rate can be adjusted individually and there is an external signal input for a Arbitrary Waveform to simulate load current.
  • Single key for OCP、OPP test function will be more efficiency and accuracy on OCP、OPP testing.
  • Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display ” +  “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
  • 150 sets test parameter and status storage function, user can recall the storage memory real time in accordance with the auto sequence requirement.
  • Maximum Voltage up to 1250V provide an idea testing solution for Power Factor Correction test.
  • Master / Slave control units maximum up to 1 MASTER, 7 SLAVE.

Applications

  • Voltage / Current source
  • SMPS transient response
  • CV/Current limit testing and battery emulation
  • Battery charger
  • Battery discharge
  • R&D Quality Control
  • ATE system
  • Production testing

All specifications are subject to change without notice.