AC & DC Electronic Load

300V, 4A, 300W


  • Must be configured in 3302C〔single channel mainframe〕or 3300C〔four channels mainframe〕
  • CC, Linear CC, CR and Crest Factor mode.
  • Dual 4 1/2 V / A / W / VA Meter on each module.
  • Last Setting Memory on each module.
  • Five Memory on Mainframe.
  • GO/NG limit Check.
  • Protections against V, I, W, and ℃.


  • The 3250A series AC&DC Load Module is suitable for Sine, Square, Step wave testing which provides an idea testing solution for UPS, AVR, D/A inverter, especially for step or square waveform U.U.T.
  • Each AC&DC Load has it own control and display panel, plug in 3302C or 3300C with 5 states
  • Store/Recall memory which provides load set-up more efficiently.
  • Adjustable power factor setting (PF, Range : 1, 0.85 ~ -0.85 ) extends the simulation of test environment.
  • Built-in GO/NG meter check function offers brief test result diagnosis for production, QC test throughput.


  • AC&DC, DC&DC, DC&AC testing
  • DC,40~400Hz Power Transformer
  • Battery discharge
  • Can be Paralleled more units for higher power
  • R&D, QC

All specifications are subject to change without notice.